Request a quote

DCH Green Series
1-10W

Standard Green Laser

DCH-532-1 | DCH-532-2 | DCH-532-6 | DCH-532-10

Features

  • 532 nm wavelength
  • Power: 1W to 10W*
  • Air-cooled design, water cooled option
  • All-in-one (AIO) single box design for 1 & 2W model
  • Patented intracavity green generation
  • Compact, rugged, monolithic
  • Total pulse control
  • TEM00 beam with typical M² < 1.3
  • Pulse rates from 1Hz to 300kHz
  • RS232 computer control
  • Field replaceable pump diodes
  • All-in-one single box design

 

OUTPUT CHARACTERISTICS

ModelDCH-532-1
DCH-532-2DCH-532-6DCH-532-10
Wavelength 532 nm
Average Power @ 40 kHz 1W
2W6W10W
Recommended Power Range 50% – 100%
Pulse Energy (μJ) @ 40 kHz ~25
~50~150~250
Pulse Width (ns) @ 40 kHz~20
Repetition Rate Single Shot to 300 kHz (optional to 500 kHz)
Pulse to Pulse Stability < 2% rms
Polarization RatioVertical; 100:1
4σ Beam Diameter @ exit ~0.4 mm
~0.4 mm~0.45 mm~0.6 mm
Beam Divergence (Full Angle Far Field) < 3 mrad
Beam Circularity~90%
Spatial Mode TEM00 M2 < 1.2
Beam Pointing Stability < 25 μrad
Beam Position Accuracy < 2.5 mm and < 10 mrad from nominal
Long Term Stability (8 hr +/- 1 degrees Celsius) ± <2% rms

*Dimensions given are without heatsinks. Air cooled or water cooled heatsink options are available (see dimensional drawings)

ENVIRONMENTAL AND UTILITY REQUIREMENTS
ModelDCH-532-1 DCH-532-2DCH-532-6DCH-532-10
Electrical Requirement100 to 240V AC
Relative HumidityNon-condensing, 90% Max
Warm Up Time< 5 min from standby or cold start
Maximum Heat Load (laser head)~50 W~100 W
Ambient Temperature15°C to 35°C (59° to 95°F) Operating Range
InterfaceEthernet / RS 232 / GUI / External TTL Triggering
DIMENSIONS
ModelDCH-532-1DCH-532-2DCH-532-6DCH-532-10
Dimensions* Laser Head4 in x 2.75 in x 8.1 in4 in x 2.5 in x 7.78 in
(W x H x L) ControllerNone12 in x 3.5 in x 8.5 in
Weight Laser Head~6 lbs~6.5 lbs
Weight ControllerNone10 lbs
Umbilical LengthNone1.5 m
  • LIDAR
  • MALDI-TOF Mass Spectrometry
  • Laser Microdissection
  • Thin Film Photovoltaic Manufacturing
  • ITO Patterning
  • Green Marking Stainless Steel and other Metals
  • Resistor and Inductance Trimming
  • Intra-glass and Glass Surface Marking
  • Water Inspection and Marking
  • Solar Cell Processing
  • Metal Cutting and Drilling

Please contact us for more options