Request a quote

RGH Green Series
3-65W

Green Laser

RGH-532-3/5 | RGH-532-20 | RGH-532-30 | RGH-532-48 | RGH-532-65*

Features

  • High single pulse energy: over 400μJ@100kHz
  • Total pulse control
  • Burst mode
  • Variable rep rate: single shot to 2MHz
    • Option to 8MHz
  • PEC: power or pulse energy control
  • Pulse width ~7ps
  • Zero leakage
  • Excellent beam quality (M²<1.3)
  • Exceptional beam pointing stability
  • Compact industrial grade ps laser
  • Low maintenance

*RGH-532-65 is a non-standard product, please contact us for specs

OUTPUT CHARACTERISTICS

ModelRGH-532-3/5RGH-532-20RGH-532-30RGH-532-48
Wavelength 532 nm
Average Power 3/5W@100 kHz 20W@100 kHz 35W** 48W**
Pulse Width ~7ps
Repetition Rate†100kHz to 2MHz 100kHz** to 2 MHz
Pulse to Pulse Stability @ 1 MHz < 2% rms
Spatial Mode TEM00 M2<1.3
Beam Pointing Stability < 25 urad/oC
Long Term Power Stability (8h±3 °C) < ±2% rms
Line Frequency50 to 60 Hz

† Lower rep rates (down to single shot) achieved by selecting higher rep rate pulses with the AOM. Option to 8MHz
‡ Measured at 1064 nm
** Rep rate specified depend on –L, -M or –H optimization desired (see performance curves)

ENVIRONMENTAL AND UTILITY REQUIREMENTS
ModelRGH-532-3/6RGH-532-20RGH-532-30RGH-532-50
Power Consumption (excluding chiller) < 600 W
Warm Up Time < 15 min
VibrationUp to 3g
CoolingClosed Loop Chiller
Operating Temperature 15°C to 30°C (59° to 86°F)
InterfaceEthernet / RS 232 / GUI / External TTL Triggering
Electrical Requirement100 to 240V AC
DIMENSIONS
ModelRGH-532-3/6 RGH-532-20 RGH-532-30 RGH-532-50
Dimensions10 in x 3.75* in x 32 in 12 in x 3.75* in x 34 in
Weight~74 lbs~90 lbs

* Does not include height of desiccant (0.35’’) and height of removable feet

  • 3D LIDAR
  • Glass and Sapphire Cutting and Drilling
  • Semiconductor Scribing and Dicing
  • PCB Processing
  • Ceramic Cutting, Drilling and Scribing
  • CIGS Solar Cell Scribing and Drilling
  • LED Scribing, Dicing and Patterning
  • Metal Cutting, Drilling and Marking
  • Medical Device Cutting, Drilling and Marking
  • Laser Cutting for Glass Reinforced Plastic & Carbon Fiber
  • Cutting and Scribing of Display Glass and Functional Foils for FPDs
  • Printing and Embossing Tools

Please contact us for more options