Laser Microprocessing/Micromachining
-
DX Air-Cooled Series
355nm / 532nm Nanosecond LasersHigh output power: 10W UV at 50kHz. 20W Green at 70kHz.
Features
- All-in-one (AIO), air-cooled form factor
- Total pulse control
- Pioneering intracavity harmonic technology
Overview
The Photonics Industries DX-AC Series offers a compelling solution for applications from ultraviolet marking, specialty material micromachining, and additive manufacturing.
These fully air-cooled lasers deliver industry-leading performance in beam quality, stability, and precision control. This is achieved through Photonics Industries’ pioneering intracavity UV and Green harmonic technology, ensuring higher reliability and lower COO. The DX-AC Series achieves this high performance in a remarkably compact package. The all-in-one (AIO) design integrates all electronics within the laser head, eliminating the need for a separate controller or utility module and minimizing footprint. The laser is “plug-and-play” with a simple 15V power supply for ease-of-integration.
DX-AC-Series-Brochure-v1.0-1.15.25 -
FS Series
Femtosecond LasersFemtosecond LasersHigh power laser (up to 100 W in IR) with ultra-short pulse (~400 fs)
FS1-1030-5 | FS1-1030-50 | FS2-1030-100
FS1-515-2.5 | FS1-515-25 | FS2-515-50
FS1-343-1 | FS1-343-10 | FS2-343-25
FS Series Femtosecond Lasers Brochure
Features
- Wide range of wavelengths: 1030 nm, 515 nm, 343 nm, and 257 nm available upon request.
- The most compact, rugged, All-in-One fs laser
- Repetition rates up to 32MHz
- Excellent TEM00 beam with typical M2 < 1.3
- Exceptional Beam Pointing Stability < 25 μrad
- PEC (Power or Pulse Energy Control)
- PSO (Position Synchronized Output) support for external triggering to any arbitrary PRF while maintaining a constant, stable pulse energy with low jitter.
- Burst Mode for individually controllable bursts of pulses with variable separations.
- POD (Pulse-On-Demand), where a burst of pulses with separation equal to the PRF, can be triggered internally, externally, or continuously, while maintaining constant pulse energy.
Overview
Photonics Industries FS Series Femtosecond Lasers offer short pulse widths (< 450 fs), high output power in a market-leading compact form factor (up to 100 W at wavelength 1030 nm), and high pulse repetition rates up to 8 MHz or greater (fixed at ~32 MHz available on request). With high single pulse energy, up to 700 µJ, all-in-one (AIO) form factor (no separate chassis for PSU or utility), and high-power efficiencies (low power consumption less than 600 W), the FS is an ideal laser for industrial system integration or for scientific research applications.
FS Series Femtosecond Lasers Brochure
FS-Series-Brochure-v1.0-1.24.25 -
DX Short Pulse Series
355nm / 532nm Nanosecond LasersHigh output power: 50W UV at 50kHz (1mJ). 80W Green at 100kHz (0.8mJ). < 25ns.
Features
- High single pulse energy – 1mJ
- Pioneered intracavity harmonics – Excellent beam quality, low COO
- All-in-one (AIO) for easy integration
Overview
Photonics Industries’ DX Series short pulse nanosecond lasers provide industrial systems with the most ideal compact form factor, short pulse width (down to ~10 ns), high power, high repetition rate (up to 1 MHz) Q-switched DPSS laser for high production throughput and precision quality. Specially patented intracavity harmonic generation, with no damaging indexing on the harmonic crystals, allows for higher performance and higher reliability, fulfilling demanding production criteria.
DX2-Series-Brochure-v1.0-1.15.25 -
DX Long Pulse Series
355nm / 532nm Nanosecond LasersLong pulse, high output power: >30W UV, 12~300ns. 50W Green, 65~340 ns.
Features
- Unique in market for long, high energy nanosecond pulses
- Pioneered intracavity harmonics – Excellent beam quality, low COO
- All-in-one (AIO) for easy integration
Overview
Photonics Industries’ DX Series long pulse nanosecond lasers provide industrial systems with a slim form factor, longer pulse width (up to ~340 ns), high repetition rate (up to 200 kHz) Q-switched DPSS laser for long pulse, thermal-focused, and deeper depth microprocessing. Specially patented intracavity harmonic generation, with no damaging indexing on the harmonic crystals, allows for higher performance and higher reliability, fulfilling demanding production criteria.
DX-Long-Pulse-Series-Brochure-v1.0-1.15.25 -
DX Nd:YLF Series
527nm YLF Nanosecond LasersTEM00 pulse energy: 35 mJ at 1 kHz, 527 nm.
Features
- Highest pulse energy at 1kHz with TEM00 beam mode commercially available
- Compact form factor for easy integration
- Industry-leading intracavity Nd:YLF technology for 30+ years
-
DP Series
Nanosecond LasersHigh Pulse Energy Nanosecond LasersHigh pulse energy, TEM00 output, with low pulse widths: Up to 50 mJ at 6-10 ns pulse width range
DP5 | DP20 | DP50 | DP1k
DP Series High Pulse Energy Nanosecond Lasers Brochure
Features
- Extremely efficient with 5X to 10X lower heat vs. the competition: 5% to 10% conversion from wall power.
- Small, air-cooled, all-in-one (AIO) form factor
- Multiwavelength Selectable (MWS) & Multiwavelength Blended (MWB) options: Select and/or blend IR, Green, UV, & DUV
- Continuously variable pulse repetition rates: 1 Hz to 100 Hz, or up to 1 kHz
- Superior beam pointing stability: < 25 µrad
- Total Pulse Control for ideal integration into systems: Duty Control, PEC (Power or Pulse Energy Control)
- Reliable, low COO, non-consumable design: Patented intracavity harmonic UV & Green generation
Overview
Photonics Industries’ DP Series diode-pumped solid-state (DPSS), Q-Switched, high energy, short pulse width lasers combine up to 20mJ pulse energy levels, TEM00 output, and exceptional power efficiency with 10X lower heat load vs. closest competitors. With the ability to select and/or blend multiple wavelengths, the DP Series is an ideal, compact air-cooled package for industrial applications, from intra-marking glass, to repairing displays. Scientific applications also benefit where the high pulse energies align well for atomic excitation research or spectroscopy systems.
DP Series High Pulse Energy Nanosecond Lasers Brochure
DP-Series-Brochure-V1.301-03.04.25 -
RX Series
Infrared / Green / UV Picosecond LasersHigh single pulse energy: ~1 mJ single pulse energy IR
Features
- Single pulse energy ~1mJ
- All-in-one (AIO) for ease of integration
- >1.1mJ total burst energy
Overview
Photonics Industries’ RX Series mid power picosecond lasers offer high performance, high precision, and robust form factor for the most demanding industrial as well as scientific applications. Photonics Industries is proven, with over a thousand picosecond lasers shipped worldwide, to meet and fulfill precision needs in manufacturing, scientific research, and new, emerging requirements necessitating ever smaller pulse widths in the ultrafast regime.
RX-Series-Brochure-v1.1-1.9.25 -
RGLX Series
High Pulse Energy Picosecond LasersHigh pulse energy: 4 mJ IR, or 2.5 mJ Green at 1 kHz. With ~30 ps pulse widths.
Features
- Air-cooled 4mJ at 1kHz available
- High kHz pulse repetition rates
- All-in-one (AIO) design
Overview
Photonics Industries’ RGLX Series picosecond lasers offer low pulse widths (~30 ps ps), high pulse energies (up to 4 mJ), and high repetition rates (up to 5 kHz). With no separate utility module, the all-in-one (AIO) RGLX Series is a pioneering laser for research, especially fulfilling new and emerging requirements in laser ranging (SLR), and also offers industrial sectors the pulse energy, repetition rate, and convenient AIO package for integration into systems for efficient micro-processing and meso-processing.
RGLX_Series_Brochure_20221222_02