Sort by:

Laser Singulation - Silicon and Sapphire

  • DX Air-Cooled Series

    355nm / 532nm Nanosecond Lasers

    High output power: 10W UV at 50kHz. 20W Green at 70kHz.

    ⤓ DX-AC Series Datasheet

    Features

    • All-in-one (AIO), air-cooled form factor
    • Total pulse control
    • Pioneering intracavity harmonic technology

    Overview

    The Photonics Industries DX-AC Series offers a compelling solution for applications from ultraviolet marking, specialty material micromachining, and additive manufacturing.

    These fully air-cooled lasers deliver industry-leading performance in beam quality, stability, and precision control. This is achieved through Photonics Industries’ pioneering intracavity UV and Green harmonic technology, ensuring higher reliability and lower COO. The DX-AC Series achieves this high performance in a remarkably compact package. The all-in-one (AIO) design integrates all electronics within the laser head, eliminating the need for a separate controller or utility module and minimizing footprint. The laser is “plug-and-play” with a simple 15V power supply for ease-of-integration.

    ⤓ DX-AC Series Datasheet

    DX-AC-Series-Brochure-v1.0-1.15.25

  • FS Series
    Femtosecond Lasers

    Femtosecond Lasers

    High power laser (up to 100 W in IR) with ultra-short pulse (~400 fs)

    FS1-1030-5 | FS1-1030-50 | FS2-1030-100

    FS1-515-2.5 | FS1-515-25 | FS2-515-50

    FS1-343-1 | FS1-343-10 | FS2-343-25

    FS Series Femtosecond Lasers Brochure

    Features

    • Wide range of wavelengths: 1030 nm, 515 nm, 343 nm, and 257 nm available upon request.
    • The most compact, rugged, All-in-One fs laser
    • Repetition rates up to 32MHz
    • Excellent TEM00 beam with typical M2 < 1.3
    • Exceptional Beam Pointing Stability < 25 μrad
    • PEC (Power or Pulse Energy Control)
    • PSO (Position Synchronized Output) support for external triggering to any arbitrary PRF while maintaining a constant, stable pulse energy with low jitter.
    • Burst Mode for individually controllable bursts of pulses with variable separations.
    • POD (Pulse-On-Demand), where a burst of pulses with separation equal to the PRF, can be triggered internally, externally, or continuously, while maintaining constant pulse energy.

    Overview

    Photonics Industries FS Series Femtosecond Lasers offer short pulse widths (< 450 fs), high output power in a market-leading compact form factor (up to 100 W at wavelength 1030 nm), and high pulse repetition rates up to 8 MHz or greater (fixed at ~32 MHz available on request). With high single pulse energy, up to 700 µJ, all-in-one (AIO) form factor (no separate chassis for PSU or utility), and high-power efficiencies (low power consumption less than 600 W), the FS is an ideal laser for industrial system integration or for scientific research applications.

    FS Series Femtosecond Lasers Brochure

    FS-Series-Brochure-v1.0-1.24.25

  • DX Short Pulse Series

    355nm / 532nm Nanosecond Lasers

    High output power: 50W UV at 50kHz (1mJ). 80W Green at 100kHz (0.8mJ). < 25ns.

    ⤓ DX-SP Series Datasheet

    Features

    • High single pulse energy – 1mJ
    • Pioneered intracavity harmonics – Excellent beam quality, low COO
    • All-in-one (AIO) for easy integration

    Overview

    Photonics Industries’ DX Series short pulse nanosecond lasers provide industrial systems with the most ideal compact form factor, short pulse width (down to ~10 ns), high power, high repetition rate (up to 1 MHz) Q-switched DPSS laser for high production throughput and precision quality. Specially patented intracavity harmonic generation, with no damaging indexing on the harmonic crystals, allows for higher performance and higher reliability, fulfilling demanding production criteria.

    ⤓ DX-SP Series Datasheet

    DX2-Series-Brochure-v1.0-1.15.25

  • DX Long Pulse Series

    355nm / 532nm Nanosecond Lasers

    Long pulse, high output power: >30W UV, 12~300ns. 50W Green, 65~340 ns.

    ⤓ DX-LP Series Datasheet

    Features

    • Unique in market for long, high energy nanosecond pulses
    • Pioneered intracavity harmonics – Excellent beam quality, low COO
    • All-in-one (AIO) for easy integration

    Overview

    Photonics Industries’ DX Series long pulse nanosecond lasers provide industrial systems with a slim form factor, longer pulse width (up to ~340 ns), high repetition rate (up to 200 kHz) Q-switched DPSS laser for long pulse, thermal-focused, and deeper depth microprocessing. Specially patented intracavity harmonic generation, with no damaging indexing on the harmonic crystals, allows for higher performance and higher reliability, fulfilling demanding production criteria.

    ⤓ DX-LP Series Datasheet

    DX-Long-Pulse-Series-Brochure-v1.0-1.15.25